Home Bypass icloud Lock Bypass Untethered iPhone 5S iCloud Activation Via F3arRa1n 2021

Bypass Untethered iPhone 5S iCloud Activation Via F3arRa1n 2021

Apple has a security feature (Icloud) in its iOS, is one of the tightest security systems, After restoring your iPhone 5S to factory settings, the iOS asks you to enter the last Icloud used in the iPhone 5S before performing the restore to verify the identity of the real owner of the iPhone 5S device. This feature is important and is intended to avoid misuse of the iPhone 5S device during thefts. But at the same time, some users have got into trouble because of it, when they have forgotten their iCloud credentials after hard reset iPhone 5S. So, in this tutorial, we have brought the latest method to Bypass Untethered iPhone 5S iCloud Activation Via F3arRa1n 2021 easily by following some simple steps.

Read more: Bypass iCloud iPhone 5s Via One-Click icloudBypassCA tool

iPhone 5S Specifications

The iPhone 5s released in September 2013. iPhone 5s comes with 1 GB RAM and 16/32/64 GB ROM. The iPhone 5s has a 4.00 inches  IPS LCD with a resolution of 640 x 1136 pixels, the iPhone 5s runs on Dual-core 1.3 GHz Cyclone Apple A7, and powered by a 1516mAh non-removable battery. The iPhone 5s comes with a single MAIN Camera 8-megapixel and a 1.2-megapixel on SELFIE Camera.

iCloud Bypass Tool:

Download Rufus For Windows

Download checkn1x-1.1.6

Download F3arRa1n V4.2.0 For Windows


How to Bypass iCloud lock iPhone 5S

  • First, you need to Jailbreak your iPhone 5S Via Rufus.
  • Open the Rufus tool and connect your iPhone 5S to your computer.
  • Insert a USB device +1 GB then click on SELECT.

  • Find the checkn1x-1.1.6 then click Open.

  • Choose GPT & NTFS then click on START.

  • All data on the USB will be destroyed, click OK to Continue.

  • Wait until making the Chekra1n jailbreak USB flash drive finish.

  • Congratulations, the jailbreak U disk has been made successfully, click Close.

  • Restart your computer & boot it via USB Drive
    • Boot option Keys
      • Acer: ESC, F12, F9
      • Asus: ESC, F8
      • DELL: F12
      • HP: ESC, F9
      • Lenovo: F12, FN + F12.
      • Samsung: ESC
      • SONY: F10
      • Toshiba: F12

  • Click on ALT+F2 then connect your iPhone 5S to the computer.

  • If you get that your iPhone 5S Not supported click on OPTIONS.

  • Check Allow untested iOS/iPADOS/TVOS versions then click on back.

  • Your iPhone 5S connected to normal mode then click on NEXT.

  • Entering your iPhone 5S to recovery mode
    • Click Start
    • Press and hold the side and volume buttons together
    • Release the side button but keep holding the volume down button

  • Your iPhone 5S device is now in recovery mode
  • Wait until installing the jailbreak then click on Done.

  • Reboot your Computer then Run the F3arRa1n V4.2.0 tool
  • Connect your iPhone 5S to your Computer.
  • Login in with your F3arRa1n account
    • if you don’t have an account just Register

  • SAVE LOGIN DATA FOR AUTOMATIC LOGIN then click YES.

  • Click on Check Compatibility Activate/process in one-click

  • Choose SIMless Method by clicking on YES

  • Click on YES Again.

  • Wait about 8 min until bypass iPhone 5S iCloud Complete

  • Activated Success.

  • Done Bypass Untethered iPhone 5S iCloud Activation Via F3arRa1n 2021.

Read more: MEID iCloud Bypass iPhone 5s With Signal Unlocked SIM Checkm8.info

4 COMMENTS

  1. Hello my dear sir, I have a problem I finished doing the boot step, then restart the PC in boot mode by pressing the ESC key on my Samsung PC, I selected the USB key as a result I’ve this message:

    ERROR: BIOS/LEGACY BOOT OF UEFI-ONLY MEDIA

    This drive was created by Rufus [https://rufus.ie]

    It can boot in UEFI mode only but you are trying to boot it in BIOS/Legacy mode. THIS WILL NOT WORK!

    To remove this message you need to do ONE of the following:
    o If this computer supports UEFI, go to your UEFI settings ans lower or disable the prioprity of CSM/Legacy mode.
    o OR Recreate the drive in Rufus and use:
    * Partition scheme –> MBR.
    * Traget system –> BIOS ( . . . )
    o OR Ecrase the whole drive in Rufus by selecting:
    * Boot Type –> Non Bootable

    Note : You may also see this message if you installed a new OS and your computer is unable to boot that OS in UEFI mode.

    Please remove this media and press any key to reboot

    That’s the error message I’ve on the screen.

    • Drop, I just found the solution, I used the Baleaetcher software to boot my UBS key after bootage, I started my key via BIOS Boot mode and it worked, more error message.

      Thanks for this tip (tuto)

  2. Drop, I just found the solution, I used the Baleaetcher software to boot my UBS key after bootage, I started my key via BIOS Boot mode and it worked, more error message.

    Thanks for this tip (tuto)

LEAVE A REPLY

Please enter your comment!
Please enter your name here